Compaq 230934-002, Switch 6 manual Viewing and Clearing the Pending Table

Command Line Interface

The steps of stage one include:

•Viewing and clearing the pending table

•Creating the zone set

•Adding zones to the zone set

•Adding zone members to the zones

•Changing the names of the zone members (optional)

•Enabling the pending table zone set

Viewing and Clearing the Pending Table

Start by checking what has already been created:

1.View the pending table. cmd> zone pending

Inactive zoneset [set1] contains 1 zone (s) zone [ntgroup1] contains 0 member(s)

Inactive Zoneset [set2] contains 1 zone(s) zone [solaris1] contains 0 members)

Inactive zoneset [set3] contains 1 zone(s) zone [ntgroup2] contains 0 member(s)

NOTE: You can also use abbreviated forms of CLI commands. For example, instead of using “cmd> zone pending,” you can use “cmd> zn pn.” For a list of the CLI abbreviations, type “help.”

2.Clear the existing pending table. cmd> zone clear

Cleared pending zone configuration.

3.Display the pending table to verify that it was cleared. cmd> zone pending

Zone table is empty.

C-42 Modular SAN Array Fabric Switch 6 User Guide