Compaq Switch 6, 230934-002 manual Ipaddress

Command Line Interface

Traps— Displays trap entry settings.

Traps Add <ip_address,port_number> — This command is used to add new trap recipients. Up to eight trap recipients are supported. The command variables are defined as follows:

Variables	Description
ip_address	Sets the IP address of the SNMP trap recipient that you want
	to add.
port_number	Sets the port number of the SNMP trap recipient that you
	want to add. The default is 162.

Traps Delete <ip_address,port_number> — This command is used to delete trap recipients from the recipients list. The command variables are defined as fol- lows:

Variables	Description
ip_address	The IP address for the trap recipient that you want to remove
	from the recipients list.
port_number	The port number for the trap recipient that you want to
	remove from the recipients list.

Traps Filter <ip_address,port_number> = <trap_type> — This command is used to set the type of traps that you want forwarded to a particular SNMP trap recipient. The command variables are defined as follows:

Modular SAN Array Fabric Switch 6 User Guide C-33