Compaq 230934-002 manual Modular SAN Array Fabric Switch 6 User Guide

Laser Precautions and Fibre Cables

If you are using an existing 62.5-micron cable in your infrastructure, you must obtain

a62.5-micron jumper from an independent source. A 50-micron cable cannot be spliced with a 62.5-micron cable.

CAUTION: Make certain the Fibre Channel cables are installed and supported so that no excess weight is placed on the Fibre Channel connectors. This is necessary to prevent damage to the connector and cable and to prevent a cable bend radius less than 3 inches (7.62 cm) at the connector and along the cable length. Excess Fibre Channel cable should be coiled and tied out of the way, being careful not to coil the cable in a tight loop with a bend radius of less than 3 inches (7.62 cm).

Modular SAN Array Fabric Switch 6 User Guide D-3