Command Line Interface

Example:

Figure C-10: Hwcfg command

Log

This command will display and modify the event-log settings. When an event occurs, if the event’s severity matches the “LogLevFilter” setting, the event will be logged into the event-log buffer. If the event’s severity matches the DispLevFilter setting, the event will be displayed on the console. “List” will display the entries contained in the event-log buffer. “Upload” will upload the event-log entries to the server specified by “Tftplp” into a file specified by “Tftp Filename.” Press Ctrl-Cto temporarily disable the event log display. Press Ctrl B to enable the event log display.

Syntax

Log

Display event-log settings

Log LogLevFilter = <level>

Modify the event-log level

filter

 

Log LogModFilter = <level>

Modify the event-log module

filter

 

Log DispLevFilter = <level>

Modify the event-log

display level filter

 

Log DispModFilter = <level>

Modify the event-log

display module filter

 

Log PrtMsgLvl <prt> = <num>

Modify the port message

level

 

Modular SAN Array Fabric Switch 6 User Guide

C-13

Page 120
Image 120
Compaq Switch 6, 230934-002 manual Log, Figure C-10 Hwcfg command