Compaq 230934-002, Switch 6 manual Initial Switch Configuration task option

Initial Configuration of the Switch

Initial Switch Configuration

After a switch is selected in the Switch Configuration screen, available configuration tasks for that switch are listed. See Figure 2-10 for an illustration of these configuration task options.

During the initial configuration of the switch, only one option is displayed. If the switch has already been configured and is active, additional tasks are displayed. These additional tasks are discussed in the following section, “Advanced Switch Configuration.”

To initially configure the switch:

1.Select ACU-XE Switch Configuration.

Figure 2-10: Initial Switch Configuration task option

An input screen is displayed. See Figure 2-11.

2-16 Modular SAN Array Fabric Switch 6 User Guide