Compaq 230934-002, Switch 6 manual Ipaddress,port number

Command Line Interface

Variables	Description
ip_address,port number
ip_address	The IP address of the SNMP trap recipient that you
	want to create a filter for
port_number	The port number of the SNMP trap recipient that
	you want to create a filter for
trap_type
EMer	Filters for traps of the type “Emergency”. Highest
	level of severity
Alert	Filters for traps of the type “Alert”.
Crit	Filters for traps of the type “Critical”.
ERr	Filters for traps of the type “Error”.
Warn	Filters for traps of the type “Warn”.
Notify	Filters for traps of the type “Notify”.
Info	Filters for traps of the type “Info”.
Debug	Filters for traps of the type “Debug”.
Mark	Filters for traps of the type “Mark”. Lowest level of
	severity.

Traps State = <ip_address,port_number> = <trap_state> — This command is used to set the state of a particular SNMP trap recipient as active or inactive. The command variables are defined as follows:

C-34 Modular SAN Array Fabric Switch 6 User Guide