Conair CTS 7, CTS 9, CTS 5 manual Maint. Area, R c t n S o f t k e y, Change Softkey

Conair Servo Traveling Saw

Operator Control Instructions

Maint. Area

There are three sub-menus, Dirctn, P/M, and Table accessible in the maintenance area.

SELECT MAINT . AREA

Dirctn P/M Table

Exit or Prev- Pressing Exit or Prev will return the display to the Menu Area screen.

D i r c t n S o f t k e y

By pressing the soft key located under the word Dirctn on the Maint. Area Screen, the direction of the encoder can be changed.

COUNT DIRECTION IS

INCORRECT Change

Located on the lower left side of the display is the status text (INCORRECT/CORRECT) for the encoder direction.

Exit or Prev- Pressing Exit or Prev will return the display to the Maint. Area screen.

Change Softkey

With the machine stopped, by pressing the soft key located under the word Change. The direction of the encoder is reversed. After the change if the count direction is positive, the status text will now display the word CORRECT.

Appendix B-1 (11)