Conair CTS 9, CTS 7, CTS 5 manual Cycles Softkey, B l e S o f t k e y

Conair Servo Traveling Saw

Operator Control Instructions

Cycles Softkey

Pressing the soft key located under the word Cycles on the

MACH . CYCLES 00000000

Exit

P/M area screen, selects the machine cycles screen.

The Machine Cycles screen displays the total cycles that the machine has completed. This information could be used for scheduling preventive maintenance. The displayed total can not be reset.

Exit or Prev- Pressing Exit, Prev or the Softkey under the word Exit returns the display to the P/M area screen.

T a b l e S o f t k e y

Pressing the soft key located under the word Table on the Maint area screen. Selects the Table area screen. Two table

SELECT DIRECTION

Return Advance

travel direction sub-menus, Return and Advance can be displayed.

Exit or Prev- Pressing Exit or Prev returns the display to the Maint area screen.

Appendix B-1 (13)