INSTALLATION

Follow the given procedure for correct cable insertion:

 

Align

3

 

 

 

 

1

2

5

 

 

6

Notch

Arrow

Tab

4

7

cSlip the cover over the cable.

dPush the plastic boot into the rubber gasket. Take care that the tab on the plastic boot is aligned with the notch in the rubber gasket.

ePush the plastic boot and gasket into the handle. Ensure that the “Front” marking on the plastic boot is facing out, with the arrow pointing towards the front of the scanner.

fInsert the cable into the socket of the plastic boot.

gInsert the cable spacer into the cable wire and slide it towards the handle.

hPush the cover along the cable towards the reader, and hook it over the yellow “tooth”.

iInsert the strain relief into the cover and tighten the screw to fix the whole assembly to the reader handle.

Connections should always be made with power OFF!

CAUTION

3