Datalogic Scanning D8330, M8300 ÌVWÎ, Ì$+;Î, Ì$-?Î, ÌEH/Î, ÌEH/Î, ÌEB0SÎ, ÌEB1VÎ, ÌEB2YÎ, ÌEB3\Î, 00-FD, Example

Enter Configuration		Exit and Save Configuration
Ì$+;Î	DATA FORMAT	Ì$-?Î
	CODE IDENTIFIER

‹disable

ÌEB0SÎ

Datalogic standard

ÌEB1VÎ

AIM standard

ÌEB2YÎ

custom

ÌEB3\Î

CUSTOM CODE IDENTIFIER

define custom code identifier(s)

ÌEH/Î

cRead the above code.

(Code Identifiers default to Datalogic standard, see table on previous page).

dSelect the code type from the code table in Appendix B for the identifier you want to change.

eYou can define 1 or 2 identifier characters for each code type. If only 1 identifier character is required, the second character must be selected as FF (disabled). Read the hexadecimal value corresponding to the character(s) you want to define as identifiers for the code selected in step d: valid characters are in the range 00-FD.

Example: To define Code 39 Code Identifier = @

	define custom code identifier(s)	Code 39
Read	ÌEH/Î	+ ÌVWÎ + 40 + FF

71