Enter Configuration |
| Exit and Save Configuration |
Ì$+;Î | DATA FORMAT |
FIELD ADJUSTMENT
disable field adjustment
ÌEF0[ÎField adjustment allows a number of characters n, to be added to or subtracted from the barcode read. The adjustment can be different for each enabled code type. To define the field adjustment:
cRead the enable field adjustment code:
dSelect the code type from the Code Identifier Table in Appendix B.
eSelect the type of adjustment to perform:
left addition
Ì12Îleft deletion
Ì34ÎfRead a number in the range 01 - 32 from the Hex/Numeric Table to define how many characters to add or delete:
•Adjustment is only performed on the barcode data, the Code Identifier and Code Length Transmission fields are not modified by the field adjustment parameter.
•If the field setting would subtract more characters than exist in the barcode, the subtraction will take place only to code length 0.
•You can set up to a maximum of 10 different field adjustments on the same barcode family or on different barcode families.
Example: To add 4 characters to the right of Standard Code 39 Codes:
enable field adjustment | Code 39 | right addition |
Read ÌEF+Î | + ÌVWÎ + | Ì01Î + 04 |
75