Datalogic Scanning D8330, M8300 Ì$-?Î, Ì$-?Î, Ì$+;Î, Ì9FÊÎ, +Ì$-?Î, Ì9DÆÎ +, Ì9EÈÎ +, ÌEA125Î +, Read Ì$+;Î + ÌEA01.Î+, Read Ì$+;Î + ÌEA01.Î+, 5.4.3Address Stamping, 5.4.4Address Delimiter

POWERSCAN® D8330/M8300

2.the following example allows setting Special Key 2 (defined in example 2 above) as header:

enter configurationone character header	special key 2	exit & save configuration
Read Ì$+;Î + ÌEA01.Î+	Ì9DÆÎ +	Ì$-?Î

3.the following example allows setting Special Key 3 (defined in example 3 above) as header:

enter configurationone character header	special key 3	exit & save configuration
Read Ì$+;Î + ÌEA01.Î+	Ì9EÈÎ +	Ì$-?Î

4.the following example allows setting Special Key 4 (defined in example 4 above) and ENTER character as terminators:

			ASCII characters
enter configuration	two character terminator	special key 4	corresponding to the
			HEX value for character
Read Ì$+;Î +	ÌEA125Î +	Ì9FÊÎ	ENTER
			+ 83 +

exit & save configuration

+Ì$-?Î5.4.3Address Stamping

It is possible to include the reader address in the message sent to the host. The Reader Address Stamping and the Cradle Address Stamping parameters consist of a 4-digit number in the range 0000 to 1999.

For message output format, refer to chapter 6.

5.4.4Address Delimiter

The Address Delimiter allows a character to be included to separate the reader Address stamping field from the next field in the message. Any character can be included in the hexadecimal range from 00 to FE.

For message output format, refer to chapter 6.

154