Datalogic Scanning D8330, M8300 LEDs, LEDs, Button, Scan Finder, BC-80X0 / C-8000CRADLES

BC-80X0 / C-8000 CRADLESScan FinderButton

LEDs

Figure C – BC-8000

The label on the cradle contains LED indicators and a scan finder button. When the button is pressed, the cradle transmits a “broadcast” message. All properly configured scanners (Radio RX Timeout set to keep the radio “awake”) linked to that base (through a bind or a join sequence) and within radio range coverage will emit a beep sequence once every 2 seconds for 30 seconds. A scanner is considered to be linked when the last transmission ends properly.

The scan finder works only in stand-alone layout (point to point or multiple readers).

LEDs

Figure D – C-8000

vii