Datalogic Scanning D8330, M8300 x, DE0, DE1, DH0, DH1, DH2, RZ0, RZ1, RZ2, JE0, JE1, JE2, JG0, JG1, JH0, JH1, JA00, JA05, JA06, JA07, JA08, JA10, JA15, JA16, JA17, JA18, JA01x, JA11x

POWERSCAN® D8330/M8300

PEN (continued)

DESCRIPTION				STRING
Idle Level			normal	DE0
			inverted	DE1
Overflow			narrow overflow	DH0
			medium overflow	DH1
			wide overflow	DH2
Inter-block Delay (100 ms)				CK00-CK99
			NETWORK
DESCRIPTION				STRING
RS-485 Network		Disable Network		RZ0
		Enable RS-485 Slave		RZ1
		Enable RS-485 Master		RZ2
Slave Address Range		Minimum Address		JB0000-1999
		Maximum Address		JC0000-1999
Network Baud Rate		9600		JE0
		19200		JE1
		38400		JE2
Network Warning Message		not transmitted		JG0
		transmitted		JG1
Transmission Warning		not transmitted		JH0
Message		transmitted		JH1
Master Header		no header		JA00
		one character		JA01x
		two characters		JA02xx
		three characters		JA03xxx
		four characters		JA04xxxx
		five characters		JA05xxxxx
		six characters		JA06xxxxxx
		seven characters		JA07xxxxxxx
		eight characters		JA08xxxxxxxx
Master Terminator		no terminator		JA10
		one character		JA11x
		two characters		JA12xx
		three characters		JA13xxx
		four characters		JA14xxxx
		Five characters		JA15xxxxx
		six characters		JA16xxxxxx
		seven characters		JA17xxxxxxx
		eight characters		JA18xxxxxxxx
x =	Hex value from 00 to FE representing an ASCII character
188