Enter Configuration

 

Exit and Save Configuration

Ì$+;Î

CODE SELECTION

Ì$-?Î

CODE 128 FAMILY

disable the family

ÌAI0]Î

cRead the desired family code

‹Code 128ÌAI11=Î

control without transmission of

ISBT 128

check digit

 

ÌAI31CÎ

EAN 128

enabling ISBT 128 automatically

disables Puzzle Solver™.

ÌAI21@Î

 

control without transmission of

 

check digit

 

Transmit GS Before Code

Code EAN 128 uses the ASCII <GS> character to separate a variable length code field from the next code field. This character can also be transmitted before the code.

‹disable

ÌEQ0qÎ

enable

ÌEQ1tÎ

If the <GS> character has been modified in the Character Replacement parameter, the new character is affected by this command.

CODE LENGTH (optional)

The code length selection is valid for the entire Code 128 family and is calculated on the output string.

Read the code + 4 numbers for the code length where:

set code length

First 2 digits = minimum code length.

ÌAILJÎ

Second 2 digits = maximum code length.

 

The maximum code length is 99 characters.

The minimum code length must always be less than or equal to the maximum.

Examples: 0199 = variable from 1 to 99 digits in the code. 1010 = 10 digit code length only.

103