Position the base on the table and affix it by means of the screws (not provided).

INSTALLATION

4. Position the cables to be connected to the BC-80X0/C-8000 cradle along the dedicated channels, as shown in the figures below:

Horizontal Base

Inclined Base

5. Remove the plastic from the other side of the strips and affix the base to the table.

6. If mounting the BC-80X0 cradle, insert the antenna in the appropriate hole on the body of the cradle and screw it clockwise until tight.

For mounting with screws:

1. Position the cables to be connected to the BC-80X0/C-8000 cradle along the dedicated channels, as shown in the figures below:

2.

3. Position the cradle on the base by sliding it along the mounting tabs until aligned.

4. If mounting the BC-80X0 cradle, insert the antenna in the appropriate hole on the body of the cradle and screw it clockwise until tight.

15