INSTALLATION

2.9POWERSCAN® M8300 BATTERY MAINTENANCE2.9.1Battery Charging

Once the system is connected and powered, you can place the PowerScan® M8300 into the cradle to charge the battery.

When the reader is correctly inserted in the cradle, the "Reader" red LED on the cradle goes on to indicate that the battery is charging. The "Reader" green LED on the cradle goes on when the battery is completely charged.

2.9.2Replacing PowerScan® M8300 Batteries

To change the batteries in your PowerScan® M8300 scanner, press the black button or unscrew the fixing screw on the handle cover and extract the battery pack from the reader handle.

1

2

When the batteries are extracted from the scanner, the timer maintains the current hour and date for about 1 minute.

NOTE

Replace the old battery pack with a new one by inserting it within the reader handle and pushing it until it clicks.

Do not incinerate, disassemble, short terminals or expose to high temperature. Risk of fire, explosion. Use specified charger only. Risk of explosion if the battery is replaced by

an incorrect type. Dispose of the batteries as required by theWARNING relevant laws in force.

11