CONFIGURATION

9.Read the BC-80X0 restore default code:

Restore BC-80X0 Default

Ì$+RX0$-qÎ

Go to par. 4.8 Interface Selection.

4.5.1Using Multiple M-Series Readers with Same Cradle

If you want to use several M-Series readers with the same BC-80X0 cradle, you must first Bind the cradle with one of the readers (see previously described configuration procedure).

Successive readers can be associated with the same cradle by following the configuration procedure substituting the Bind command with Join (step 7).

7.Join

Ì$+RN1$-NÎ

The green LED on the PowerScan® M8300 will blink: the reader is ready to be positioned onto the cradle. Complete step 8.

END of procedure.

All readers associated with the same cradle must have different addresses.

CAUTION

YOUR READER IS NOW READY TO READ BARCODES.

To change the defaults see par. 4.10.

29