CONFIGURATION

4.7BC-8060 STAR-SYSTEM™ NETWORK SETUP

When the BC-8060 cradle model is used in an RS-485 network, it must be initially configured. To do this using configuration barcodes, follow the procedure below using any PowerScan® M8300 reader.

1.

Set BC-8060 Address

Ì$+RF4Î

 

 

+

 

four digits for the BC-8060 Address (from 0000 to 1999).

 

All cradles used in the network must have different addresses.

2.

Exit and Save configuration

Ì$-?Î

 

3.Read the Bind code to pair the PowerScan® M8300 to the BC-8060 cradle for configuration.

Bind

Ì$+RN0$-IÎ

The green LED on the PowerScan® M8300 will blink; the reader is ready to be inserted into the cradle.

4.Firmly insert the reader into the BC-8060 cradle within 10 seconds, a beep will be emitted, signaling that the BC-8060 cradle has been paired to the PowerScan® M8300, and the green LED on the reader will go off.

green LED

33