Datalogic Scanning QD 2300 manual Prefix/Suffix Values, To set a value for a prefix or suffix

Prefix/Suffix Values

Prefix/Suffix Values

A prefix and/or suffix can be appended to scan data for use in data editing as described in the feature description, Global Prefix/Suffix on page 28.

To set a value for a prefix or suffix:

1.Change the scan data format using the instructions in the feature description, Global Prefix/Suffix on page 28.

2.Scan the appropriate prefix/suffix bar code below.

3.Scan a four-digit number (i.e., four bar codes from Appendix E, Keypad) that corre- sponds to that value.

NOTE

When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the 3-digit decimal value corre- sponding to the desired keystroke as listed in Table 34 on page 167

(results in a four-digit ASCII code).

4. To correct an error or change a selection, scan Data Format Cancel on page 29.

Set Prefix

Set Suffix

Product Reference Guide 27