Datalogic Scanning QD 2300 manual Stop Bit Select, Data Bits ASCII Format, Stop Bit 2 Stop Bits

RS-232 Host Parameters

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving device for the next character in the serial data stream. The number of stop bits selected (one or two) depends on the number the receiv- ing terminal is programmed to accommodate. Set the number of stop bits to match host device requirements.

*1 Stop Bit

2 Stop Bits

Data Bits (ASCII Format)

This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol.

7-Bit

*8-Bit

Product Reference Guide 39