Datalogic Scanning QD 2300 manual Function Key Mapping, FN1 Substitution, Send Make and Break

Keyboard Wedge Host Parameters

Function Key Mapping

ASCII values under 32 are normally sent as control key sequences (see Table 10 on page 64). When this parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not have a bold entry remain the same whether or not this parameter is enabled.

Enable Function Key Mapping

*Disable Function Key Mapping

FN1 Substitution

When enabled, the scanner replaces FN1 characters in an EAN128 bar code with a key- stroke chosen by the user (see FN1 Substitution Values on page 30).

Enable FN1 Substitution

*Disable FN1 Substitution

Send Make and Break

When enabled, the scan codes for releasing a key are not sent.

*Send Make and Break Scan Codes

Send Make Scan Code Only

Product Reference Guide 63