Datalogic Scanning QD 2300 manual USB Parameter Defaults, To set up the scanner, QuickScan L

USB Interface

•Sun, IBM, and other network computers that support more than one keyboard.

The following operating systems support the scanner through USB:

•Windows 98, 2000, ME, XP

•MacOS 8.5 and above

•IBM 4690 OS.

The scanner will also interface with other USB hosts which support USB Human Inter- face Devices (HID). For more information on USB technology, hosts, and peripheral de- vices, visit the website listed on the back cover of this manual.

Interface cables vary depending on configuration. The connectors illustrated in Figure 12 are examples only. The connectors may be different than those illustrated, but the steps to connect the scanner remain the same.

NOTE

To set up the scanner:

1.Attach the modular connector of the USB interface cable to the cable interface port on the scanner (see Installing the Interface Cable on page 6).

2.Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of the IBM SurePOS terminal.

3.Select the USB device type by scanning the appropriate bar code from USB Device Type on page 77.

4.On first installation when using Windows, the software prompts to select or install the Human Interface Device driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the last choice. The scanner powers up dur- ing this installation.

5.To modify any other parameter options, scan the appropriate bar codes in this chapter.

6.If problems occur with the system, see Table 3.

USB Parameter Defaults

Table 16 lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate bar code(s) provided in the Parameter Descriptions section begin- ning on page 77.

See Appendix B, Standard Defaults for all user preferences, hosts, symbolo- gies, and miscellaneous default parameters.

NOTE

76 QuickScan® L