5.Lift the front of the system board tray upward slightly and then pull the tray straight back until it clears the chassis.
Replacing the System Board Tray
CAUTION: Before you perform this procedure, read the safety instructions in your System Information document.
CAUTION: See "Protecting Against Electrostatic Discharge" in the safety instructions in your System Information document.
1.With the system board tray levers in the upright position, slide the tray into the chassis until it stops (see Figure
NOTICE: To prevent damage to the system board tray levers, rotate the levers simultaneously to remove or replace the system board tray.
2.Rotate the system board tray levers down simultaneously until the tray is secured in the chassis (see Figure
3.Replace the cover (see "Replacing the Cover").
System Board Tray Levers
NOTICE: To prevent damage to the system board tray levers, rotate the levers simultaneously to remove or replace the system board tray.
Removing the System Board Tray Levers
CAUTION: Before you perform this procedure, read the safety instructions in your System Information document.
CAUTION: See "Protecting Against Electrostatic Discharge" in the safety instructions in your System Information document.
1.Remove the system board tray (see "Removing the System Board Tray").
2.For each lever, remove the screw securing the lever to the tray (see Figure
Figure 4-26. Removing the System Board Tray Levers
Replacing the System Board Tray Levers
CAUTION: Before you perform this procedure, read the safety instructions in your System Information document.
CAUTION: See "Protecting Against Electrostatic Discharge" in the safety instructions in your System Information document.
NOTICE: Ensure that the screw securing each lever to the system board tray is firmly tightened.
1.For each lever, replace the screw securing the lever to the system board tray (see Figure
2.Replace the system board tray (see "Replacing the System Board Tray").
