Dell 9100 owner manual 104

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

3If you are replacing a memory module, remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector at a 45-degree angle.

memory module

securing clips (2 per connector)

NOTICE: Make sure that memory modules are installed in both connectors and that they are of the same capacity. Insert memory modules at a 45-degree angle to avoid damaging the connector.

104

Adding and Replacing Parts