w w w . d e l l . c o m s u p p o r t . d e l l . c o m

1Follow the procedures in "Before You Begin" (see page 99).

2Turn the computer over and remove the four screws (two on each side) labeled "D" on the bottom of the computer.

screws labeled "D" (4)

3Turn the computer right-side up.

4Remove the left, right, and center hinge covers (see page 113).

antenna cables (2)

display

display cable

system board connector

5Disconnect the antennae cables (pull to separate the connectors).

6Disconnect the display cable, using the pull-tab.

116

Adding and Replacing Parts

Page 116
Image 116
Dell 9100 owner manual Screws labeled D