Subwoofer

CAUTION: Before performing the following procedures, read the safety instructions at the front of this document (see page 9).

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

If you ordered a subwoofer with your computer, it is already installed. To remove and replace a subwoofer:

1Follow the procedures in "Before You Begin" (see page 99).

2Remove the battery (see page 42).

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

3Remove the subwoofer from the battery: a Disconnect the subwoofer cable.

b Use a small screwdriver or scribe to release the subwoofer from the compartment in the battery.

subwoofer

cable

battery

subwoofer cable connector

Adding and Replacing Parts

109

Page 109
Image 109
Dell 9100 owner manual Subwoofer, 109