fan cover

captive screws (2)

Hinge Covers

CAUTION: Before you perform the following procedures, read and follow the safety instructions at the front of this document (see page 9).

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

1Follow the procedures in "Before You Begin" (see page 99).

NOTE: The hinge cover consists of three separate pieces: the left cover, the right cover, and the center cover. To remove computer components, you must remove all three covers except for when removing the keyboard or the reserve battery. For these two components, remove only the center cover.

2Remove the left and right hinge covers: a Open the display.

b Slide the left and right hinge covers toward the back of the computer, and then slide them to the side, away from the computer.

Adding and Replacing Parts

113

Page 113
Image 113
Dell 9100 owner manual Hinge Covers, 113