Using the Drivers and Utilities CD

If using Device Driver Rollback or System Restore does not resolve the problem, then reinstall the driver from the Drivers and Utilities CD.

1Save and close any open files, and exit any open programs.

2Insert the Drivers and Utilities CD.

In most cases, the CD starts running automatically. If it does not, start Windows Explorer, click your CD drive directory to display the CD contents, and then double-click the autorcd.exe file. The first time that you run the CD, it might prompt you to install setup files. Click OK, and follow the instructions on the screen to continue.

3From the Language drop-down menu in the toolbar, select your preferred language for the driver or utility (if available). A welcome screen appears.

4Click Next.

The CD automatically scans your hardware to detect drivers and utilities used by your computer.

5After the CD completes the hardware scan, you can also detect other drivers and utilities. Under Search Criteria, select the appropriate categories from the System Model, Operating System, and Topic drop-down menus.

A link or links appear(s) for the specific drivers and utilities used by your computer.

6Click the link of a specific driver or utility to display information about the driver or utility that you want to install.

7Click the Install button (if present) to begin installing the driver or utility. At the welcome screen, follow the screen prompts to complete the installation.

If no Install button is present, automatic installation is not an option. For installation instructions, either see the appropriate instructions in the following subsections, or click Extract, follow the extracting instructions, and then read the readme file.

If instructed to navigate to the driver files, click the CD directory on the driver information window to display the files associated with that driver.

Manually Reinstalling Drivers

NOTE: If you are reinstalling an infrared sensor driver, you must first enable the infrared sensor (see page 131) in system setup before continuing with the driver installation.

1After extracting the driver files to your hard drive as described in the previous section, click the Start button and right-click My Computer.

2Click Properties.

3Click the Hardware tab and click Device Manager.

4Double-click the type of device for which you are installing the driver (for example, Modems or Infrared devices).

Solving Problems

91

Page 91
Image 91
Dell 9100 owner manual Insert the Drivers and Utilities CD