dLift the center hinge cover on the right side first just enough to access the flex-cable connector.

eUsing the pull-tab, disconnect the center-hinge-cover flex cable from the system board connector.

center hinge cover

system board connector

center-hinge-cover

 

flex cable and pull-tab

Display

CAUTION: Before you perform the following procedures, read and follow the safety instructions at the front of this document (see page 9).

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

Adding and Replacing Parts

115

Page 115
Image 115
Dell 9100 owner manual Display, 115