Card with Bluetooth® Wireless Technology

CAUTION: Before you perform the following procedures, read and follow the safety instructions at the front of this document (see page 9).

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

1Remove the battery (see page 42).

2Open the card door.

3Pull the module out of the compartment so that you can disconnect the card from its cable and remove it from the computer.

card

card connector

card door

Adding and Replacing Parts

121

Page 121
Image 121
Dell 9100 owner manual Card with Bluetooth Wireless Technology, 121