Internal Card With Bluetooth®Wireless Technology
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
1. Follow the procedures in Before You Begin.
2. Remove the keyboard (see Keyboard).
3. Remove the M2 x 3-mm screw from the card holder and lay the holder aside.
4. Lift the card away from the aligning pin.
5. Disconnect the card cable connector from the card.
Coin-Cell Battery
1. Follow the procedures in Before You Begin.
2. Remove the keyboard (see Keyboard).
3. Disconnect the coin-cell battery cable connector from the system board connector.
4. Remove the coin-cell battery from the system board.
1
metal tabs (2) on SIM card slot
2
SIM card with cut-off corner
NOTE: When you replace the SIM card, ensure that you slide the SIM card under the two metal tabs on the SIM card slot with the cut-off corner of the
card facing toward the back of the computer.
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To prevent damage to the system board, remove the main battery before you service the computer.
1
internal card with Bluetooth wireless
technology
2
card cable
connector
3
M2 x 3-mm
screw
4
card holder
5
aligning pin
NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide.
NOTICE: To prevent damage to the system board, remove the main battery before you service the computer.