
Message | Causes | Corrective Actions |
|
|
|
Keyboard data | Keyboard cable connector is | Reseat the keyboard cable. If |
line failure. | improperly connected or the | the problem persists, see |
Keyboard stuck | keyboard is defective. | "Troubleshooting a USB |
| Device" on page 100. | |
key failure. |
| |
|
| |
Manufacturing | System is in manufacturing | Reboot to take the system |
mode detected. | mode. | out of manufacturing mode. |
Memory | Invalid memory | Ensure that the memory |
Initialization | configuration. The system | modules are installed in a |
Warning: Memory | will run but with less | valid configuration. See |
size may be | memory than is physically | "General Memory Module |
reduced. | available. | Installation Guidelines" on |
|
| page 73. |
No boot device | Faulty or missing optical |
available. | drive subsystem, hard drive, |
| or |
| no bootable USB key |
| installed. |
Use a bootable USB key, CD, or hard drive. If the problem persists, see "Troubleshooting a USB Device" on page 100, "Troubleshooting an Optical Drive" on page 109, and "Troubleshooting a Hard Drive" on page 111. See "Using the System Setup Program and Boot Manager" on page 23 for information on setting the order of boot devices.
PCI BIOS failed PCIe device BIOS (Option
to install. ROM) checksum failure detected during shadowing.
Cables to expansion card loose; faulty or improperly installed expansion card.
Reseat the expansion card. Ensure that all appropriate cables are securely connected to the expansion card. If the problem persists, see "Troubleshooting Expansion Cards" on page 112.
18
About Your System