Dell E11S manual Removing and Installing the Power Supply

Figure 3-22. Removing and Installing the Power Supply

2

1

			3
	4
1	power supply	2	screws (4)
3	cable clip	4	power-supply release tab

Installing the Power Supply

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Attach the cable clip to the new power supply.

2Align the power supply mounting holes with the mounting holes on the back panel.

3Slide the power supply toward the back panel until it snaps into place over the power-supply release tab.

4Using a #2 Phillips screwdriver, install the four screws that secure the power supply to the back panel.

Installing System Components

87