Figure 3-5. Removing and Installing the EMI Filler Panel
4
3
2
1
1 | tab | 2 | EMI filler panel |
3 | shoulder screws (2) | 4 | drive release latch |
Installing an EMI Filler Panel
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1Align the screws on the EMI filler panel with the slots in the chassis and slide the EMI filler panel into the bay until it clicks into place. See Figure
2Replace the front bezel. See "Installing the Front Bezel" on page 48.
3Close the system. See "Closing the System" on page 46.
Installing System Components
51
