Dell E11S manual Removing and Installing a 3.5-Inch Hard Drive

Figure 3-9. Removing and Installing a 3.5-Inch Hard Drive

2

3

1

4

1	hard drive	2	power/data cable
3	tabs (2)	4	hard drive bracket

NOTE: If you are not replacing the hard drive, remove the drive from the drive bracket (see Figure 3-11)and insert the empty bracket back into the drive bay.

5Detach the hard-drive bracket from the hard drive by pushing out at the edges of the bracket and removing the hard drive. See Figure 3-11.

6Close the system. See "Closing the System" on page 46.

58

Installing System Components