CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To install a memory card:
1Hold the card with the top side of the card facing up.
2Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
The computer recognizes the memory card and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the media that came with the memory card, if applicable.
Removing a Memory Card or Blank
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: Use the memory card configuration utility (click the 
icon in the notification area) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
Press the card into the slot to release it from the card reader. When it is partially ejected, remove the card.
82
Using the Memory Card Reader
