Dell RW491 owner manual Hinge Covers and Center Control Cover

Models: RW491

1 202
Download 202 pages 37.75 Kb
Page 132
Image 132

Hinge Covers and Center Control Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

Removing the Hinge Covers and Center Control Cover

1Follow the procedures in "Before You Begin" on page 127.

2Turn the computer over and remove the two M2 x 3-mm screws that secure the center control cover.

3Turn the computer top side up, and open the display as far as it will open.

4Remove the hinge covers from each side of the computer.

132

Adding and Replacing Parts

Page 132
Image 132
Dell RW491 owner manual Removing the Hinge Covers and Center Control Cover