CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

To install a memory card:

1Hold the card with the top side of the card facing up.

2Slide the card into the slot until the card is completely seated in its connector.

NOTE: If you encounter too much resistance, do not force the card. Check the card orientation and try again.

The computer recognizes the memory card and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the media that came with the memory card, if applicable.

Removing a Memory Card or Blank

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

Press the card into the slot to release it from the memory card reader. When it is partially ejected, remove the card.

72

Using the Memory Card Reader

Page 72
Image 72
Dell RW491 owner manual Removing a Memory Card or Blank