Chapter 2
Parts of the System
REMOTE CONTROL BATTERIES
The remote control comes with AAA batteries. When you replace old batteries, you should replace all of the batteries. Use batteries of the same kind, for example alkaline or carbon zinc, and don’t mix batteries of different kinds. Alkaline batteries last longer.
1.Press down on the top of the battery cover and slide the cover off.
2.Take out all of the old batteries.
3.Put the new batteries in. Make sure you match the plus (“+”) ends with the plus markings inside the battery case.
4.Fit the battery cover’s bottom tab back into the slot at the bottom of the battery case, and slide the cover back into place.
USING THE REMOTE CONTROL
The following section describes how to use the remote control with your satellite receiver.
POWER BUTTONS
Press the POWER button to turn the receiver ON or OFF.
TV/VIDEO BUTTON
Use this button to switch the receiver between the satellite programming and another video signal connected into the receiver’s TV ANTENNA/CABLE IN input, such as cable or broadcast TV antenna input.
MENU BUTTON
Press this button to open the Main Menu.
PAGE UP AND PAGE DOWN (ARROW) BUTTONS
Press the PAGE UP button or the PAGE DOWN button to scan,
page by page, through the Program Guide, a Theme Categories
list, a Favorite List, an Event Timers list, or a list of channels.
Page 8
