Draytek 5500 Series Enable Schedule Setup, Start Date yyyy-mm-dd, Start Time hhmm, Idle Timeout

Enable Schedule Setup	Check to enable the schedule.
Start Date (yyyy-mm-dd)	Specify the starting date of the schedule.
Start Time (hh:mm)	Specify the starting time of the schedule.
Duration Time (hh:mm)	Specify the duration (or period) for the schedule.
Action	Specify which action Call Schedule should apply during the
	period of the schedule.
	Force On -Force the connection to be always on.
	Force Down -Force the connection to be always down.
	Enable Dial-On-Demand-Specify the connection to be
	dial-on-demand and the value of idle timeout should be
	specified in Idle Timeout field.
	Disable Dial-On-Demand-Specify the connection to be up
	when it has traffic on the line. Once there is no traffic over
	idle timeout, the connection will be down and never up again
	during the schedule.
Idle Timeout	Specify the duration (or period) for the schedule.
	How often -Specify how often the schedule will be applied
	Once -The schedule will be applied just once
	Weekdays -Specify which days in one week should perform
	the schedule.
Example

Suppose you want to control the PPPoE Internet access connection to be always on (Force On) from 9:00 to 18:00 for whole week. Other time the Internet access connection should be disconnected (Force Down).

Office

Hour:

(Force On)

Mon - Sun 9:00 am to 6:00 pm

1.Make sure the PPPoE connection and Time Setup is working properly.

2.Configure the PPPoE always on from 9:00 to 18:00 for whole week.

98 VigorPro5500 Series User’s Guide