1.2.4 For VigorPro 5500Gi

 

LED

 

Status

Explanation

 

ACT (Activity)

 

Blinking

The router is powered on and running normally.

 

 

 

Off

The router is powered off.

 

Virus

 

On (Yellow)

The anti-virus function is enabled.

 

IDP (Intrusion Detection and

On

The anti-intrusion function is enabled.

 

Prevention)

 

(Yellow)

 

 

DMZ

 

On

DMZ Host is specified in certain site.

 

Monitor

 

On

LAN traffic monitor is active.

 

VPN

 

On

The VPN tunnel is launched.

 

 

 

Off

The VPN tunnel is closed.

 

QoS

 

On

The QoS function is active.

 

WLAN

 

On

Wireless access point is ready.

 

 

 

Blinking

Ethernet packets are transmitting over wireless LAN.

 

 

 

Off

The WLAN function is inactive.

 

ISDN

 

On

The ISDN service function is active.

 

 

 

Blinking

A successful connection on the ISDN BRI

 

 

 

 

B1/B2 channel.

 

LED on Connector

 

 

 

 

10

On

The port is connected with 10Mbps.

 

WAN

(left LED)

Off

The port is disconnected.

 

 

Blinking

The data is transmitting.

 

 

 

 

 

100

On

The port is connected with 100Mbps.

 

 

(right LED)

Off

The port is disconnected.

 

 

 

Blinking

The data is transmitting.

 

LAN/Monitor

100

On

The port is connected with 100Mbps.

 

LAN

(left LED)

Off

The port is disconnected.

 

 

 

Blinking

The data is transmitting.

 

 

1000

On

The port is connected with 1000Mbps.

 

 

(right LED)

Off

The port is disconnected.

 

 

 

Blinking

The data is transmitting.

VigorPro5500 Series User’s Guide

5

Page 13
Image 13
Draytek 5500 Series manual For VigorPro 5500Gi