5.2Create a Remote Dial-in User Connection Between the Teleworker and Headquarter

The other common case is that you, as a teleworker, may want to connect to the enterprise network securely. According to the network structure as shown in the below illustration, you may follow the steps to create a Remote User Profile and install Smart VPN Client on the remote host.

Settings in VPN Router in the enterprise office:

1.Go to VPN and Remote Access and select Remote Access Control to enable the necessary VPN service and click OK.

2.Then, for using PPP based services, such as PPTP, L2TP, you have to set general settings in PPP General Setup.

For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to set general settings in IKE/IPSec General Setup, such as the pre-shared key that both parties have known.

218

VigorPro5500 Series User’s Guide

Page 226
Image 226
Draytek 5500 Series manual Settings in VPN Router in the enterprise office