Draytek 5500 Series manual Bind IP to MAC, Disable, Strict Bind, ARP Table

2.After checking the box to enable VLAN function, you will check the table according to the needs as shown below.

To remove VLAN, uncheck the needed box and click OK to save the results.

3.2.5 Bind IP to MAC

This function is used to bind the IP and MAC address in LAN to have a strengthen control in network. When this function is enabled, all the assigned IP and MAC address binding together cannot be changed. If you modified the binding IP or MAC address, it might cause you not access into the Internet.

Click LAN and click Bind IP to MAC to open the setup page.

Enable	Click this radio button to invoke this function. However, IP/MAC
	which is not listed in IP Bind List also can connect to Internet.
Disable	Click this radio button to disable this function. All the settings on
	this page will be invalid.
Strict Bind	Click this radio button to block the connection of the IP/MAC
	which is not listed in IP Bind List.
ARP Table	This table is the LAN ARP table of this router. The information
	for IP and MAC will be displayed in this field. Each pair of IP
VigorPro5500 Series User’s Guide	41