Draytek 5500 Series Allowed, Interface Choose a proper interface WAN, LAN or Any, Address Type

Name	Type a name for this profile. Maximum 15 characters are
	allowed.
Interface	Choose a proper interface (WAN, LAN or Any).

	For example, the Direction setting in Edit Filter Rule will
	ask you specify IP or IP range for WAN or LAN or any IP
	address. If you choose LAN as the Interface here, and choose
	LAN as the direction setting in Edit Filter Rule, then all the
	IP addresses specified with LAN interface will be opened for
	you to choose in Edit Filter Rule page.
Address Type	Determine the address type for the IP address.
	Select Single Address if this object contains one IP address
	only.
	Select Range Address if this object contains several IPs
	within a range.
	Select Subnet Address if this object contains one subnet for
	IP address.
	Select Any Address if this object contains any IP address.
Start IP Address	Type the start IP address for Single Address type.
End IP Address	Type the end IP address if the Range Address type is selected.
Subnet Mask	Type the subnet mask if the Subnet Address type is selected.
Invert Select	If it is checked, all the IP addresses except the ones listed
	above will be applied later while it is chosen.

Below is an example of IP objects settings.

VigorPro5500 Series User’s Guide 51