Draytek 5500 Series Physical Type, Negotiation for determined by the system, Load Balance Mode

Physical Type	You can change the physical type for WAN2 or choose Auto
	negotiation for determined by the system.

Load Balance Mode	If you know the practical bandwidth for your WAN interface,
	please choose the setting of According to Line Speed.
	Otherwise, please choose Auto Weigh to let the router reach
	the best load balance.

Line Speed	If your choose According to Line Speed as the Load
	Balance Mode, please type the line speed for downloading
	and uploading through WAN1/WAN2. The unit is kbps.
Active Mode	Choose Always On to make the WAN connection
	(WAN1/WAN2) being activated always; or choose Active on
	demand to make the WAN connection (WAN1/WAN2)
	activated if it is necessary.

If you choose Active on demand, the Idle Timeout will be available for you to set for PPPoE and PPTP access modes in the Details Page of WAN>>Internet Access. In addition, there are three selections for you to choose for different purposes. WAN2 Fail – It means the connection for WAN1 will be activated when WAN2 is failed.

WAN2 Upload speed exceed XX kbps – It means the connection for WAN1 will be activated when WAN2 Upload speed exceed certain value that you set in this box for 15 seconds.

WAN2 Download speed exceed XX kbps– It means the connection for WAN1 will be activated when WAN2 Download speed exceed certain value that you set in this box for 15 seconds.

WAN1 Fail – It means the connection for WAN2 will be activated when WAN1 is failed.

WAN1 Upload speed exceed XX kbps – It means the connection for WAN2 will be activated when WAN1 Upload speed exceed certain value that you set in this box for 15 seconds.

WAN1 Download speed exceed XX kbps– It means the connection for WAN2 will be activated when WAN1 Download speed exceed certain value that you set in this box for 15 seconds.

VigorPro5500 Series User’s Guide 23