Draytek 5500 Series manual 215

2.Then, for using PPP based services, such as PPTP, L2TP, you have to set general settings in PPP General Setup.

For using IPSec-basedservice, such as IPSec or L2TP with IPSec Policy, you have to set general settings in IPSec General Setup, such as the pre-shared key that both parties have known.

3.Go to LAN-to-LAN. Click on one index number to edit a profile.

4.Set Common Settings as shown below. You should enable both of VPN connections because any one of the parties may start the VPN connection.

5.Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with the selected Dial-Out method.

If an IPSec-basedservice is selected, you should further specify the remote peer IP Address, IKE Authentication Method and IPSec Security Method for this Dial-Out

VigorPro5500 Series User’s Guide 215