Draytek 5500 Series manual Details Page for Pptp, Pptp Setup, PPP Setup, Assignment, MethodIPCP

Details Page for PPTP

To use PPTP as the accessing protocol of the internet, please choose Internet Access from WAN menu. Then, select PPTP mode for WAN2. The following web page will be shown.

PPTP Setup	PPTP Link - Click Enable to enable a PPTP client to establish a
	tunnel to a DSL modem on the WAN interface.
	PPTP Server - Specify the IP address of the PPTP server.
ISP Access Setup	Username -Type in the username provided by ISP in this field.
	Password -Type in the password provided by ISP in this field.
	Index (1-15) in Schedule Setup - You can type in four sets of time
	schedule for your request. All the schedules can be set previously
	in Application – Schedule web page and you can use the number
	that you have set in that web page.
PPP Setup	PPP Authentication - Select PAP only or PAP or CHAP for PPP.
	Idle Timeout - Set the timeout for breaking down the Internet after
	passing through the time without any action. This setting is active
	only when the Active on demand option for Active Mode is
	selected in WAN>> General Setup page.
IP Address	Fixed IP - Usually ISP dynamically assigns IP address to you each
Assignment	time you connect to it and request. In some case, your ISP provides
Method(IPCP)	service to always assign you the same IP address whenever you
	request. In this case, you can fill in this IP address in the Fixed IP
	field. Please contact your ISP before you want to use this function.
	Click Yes to use this function and type in a fixed IP address in the
	box.
	Fixed IP Address -Type a fixed IP address.
	WAN IP Alias - If you have multiple public IP addresses and
	would like to utilize them on the WAN interface, please use WAN
	IP Alias. You can set up to 8 public IP addresses other than the
	current one you are using. Notice that this setting is available for
	WAN1 only.

VigorPro5500 Series User’s Guide 29