Draytek 5500 Series manual Radius, Server IP Address, Destination Port, Shared Secret

3.Configure the Force Down from 18:00 to next day 9:00 for whole week.

4.Assign these two profiles to the PPPoE Internet access profile. Now, the PPPoE Internet connection will follow the schedule order to perform Force On or Force Down action according to the time plan that has been pre-defined in the schedule profiles.

3.10.3RADIUS

Remote Authentication Dial-In User Service (RADIUS) is a security authentication client/server protocol that supports authentication, authorization and accounting, which is widely used by Internet service providers. It is the most common method of authenticating and authorizing dial-up and tunneled network users.

The built-in RADIUS client feature enables the router to assist the remote dial-in user or a wireless station and the RADIUS server in performing mutual authentication. It enables centralized remote access authentication for network management.

Enable	Check to enable RADIUS client feature
Server IP Address	Enter the IP address of RADIUS server
Destination Port	The UDP port number that the RADIUS server is using. The
	default value is 1812 , based on RFC 2138.
Shared Secret	The RADIUS server and client share a secret that is used to
	authenticate the messages sent between them. Both sides must
	be configured to use the same shared secret.
Confirm Shared Secret	Re-type the Shared Secret for confirmation.

VigorPro5500 Series User’s Guide 99