Dynacord DPM 4000 manual 5.2.8Indications, Status, Description

DEVICE DESCRIPTIONS

5.2.8Indications

The following table provides you with an overview of the most important LED-indications.

LED	Status	Description
Selection LED	OFF	No group or area selected
(not with DPC 4106)	Lights green	Area or group selected / special function activated / direct call
		activated
ALLE LED	OFF	No collective call selected
(not with DPC 4106)	Lights green	Collective call pre-selected / direct collective call activated
BUSY LED	OFF	System not busy, clear for call
	Lights green	During own message
	Slow blinking, green	Low priority paging station launches a call in selected areas;
		interruption on cost of the momentary microphone terminal is
		possible
	Fast blinking, green	System is busy with a higher priority transmission (message,
		gong, alarm), interruption is not possible, already launched
		call is interrupted by events with higher priority setting
GONG LED	OFF	No gong signal started
	Lights green	Gong signal in progress; manually started or pre-
		programmed pre-gong signal
	Lights green	Gong signal in progress, ignited from another source or time-
		controlled
ON LED	OFF	System is OFF (stand-by mode)
	Lights green	System is ON and ready for operation
	Blinks green	System has been turned on and is booting (initialization)
PROGRAMM LED	OFF	Paging console is in message-mode
	Lights green	Paging console is in program assign mode
	Slow blinking, green	Paging console is password-protected
	Fast blinking, green	Paging console is in setup-mode
TEXT LED	OFF	No text message launched
	Lights green	Text message in progress, manually launched
	Blinks green	Text message in progress, launched from another source or
		time-controlled
ALARM	OFF	No alarm signal launched
	Lights red	Alarm signal has been launched from any source
	Blinks red	Alarm signal has already been stopped, but keeps running
		until signal-end

5-40 PROANNOUNCE System User Handbook 1.1